Allo - Volt+ Amp - Stand Alone Audio Amplifier

Price: 2,554.00INR
Ex Tax: 2,554.00INR
Brand:  Allo
Product Code:  EX-ALLO-010540
Availability:  In Stock
0 reviews  (0 reviews)   |   Write a review

ALLO - VOLT+ AMP - Stand Alone Audio Amplifier


The TPA3118 class D amplifier IC is a leap in terms of audio quality.

Our board is a high quality implementation of the stock design.

- Using TPA3118 (better grounding of main IC)
- Anti-Pop circuit
- Bootstrap snubber mod
- Brand name components as per picture
- Radio avoidance switch (to reduce interference)

Note that PCB comes in 2 flavors:

1. Volt is a shield and beneath it has connector that will plug into our DACs (Piano 1.1 and Piano 2.1). It has no RCA inputs. (Capacitance Multiplier can be added as a standalone board).

2.    Volt+ is a standalone amplifier with RCA IN (stereo). In addition to everything that the Volt has, we have added a circuit in the power supply that will reject spikes and noise to about 60db. The name of the circuit is "Capacitance Multiplier". Please note that Class D amplifier needs a quiet PSU.

Volt+ can be used with our DACs through the RCA input, as a standalone board.

Unlike our competitors that blindly copy the THD+N and SNR from datasheet, the files here show the real and tested characteristics of our Volt+ at different W of output power.

Note that in most cases we beat the THD+N and SNR from TI designed, evaluation board.


  • This class D amplifier goes up to 2 x 50W Max
  • The components used are specifically designed for high end audio devices (Würth Inductor, TI chipset, film capacitors and ± 1% thin film resistors)
  • VOLT AMP boasts 4 output filters, 4 EMI Snubbers, 4 bootstrap capacitors and gain setting components
  • We are using CM filter circuits in power section to reduce maximum ripples in power
  • We are using 10K logarithmic Potentiometer for Volume control. Available with different Input connectors: 2 x RCA
  • Comes in two flavors (Volt and Volt+)
  • Power Supply Required: 16-24V (we recommend 19V), 60-90W
  • Power Connector Jack Barrel size: 3.00mm ID (0.118"), 6.50mm OD (0.256")

Product Specifications:

Chipset  TPA3118D2
Output     2 x 50W (Max) into a 4 to 8-Ω BTL Load
Class D Operation 90% POWER EFFICIENCY
SNR     102dB
Supply Voltage UP TO 24V DC
Operating Temperature -40°C to 85°C Ambient
Board Size LWH = 82.83mm * 125.5mm * 40.2mm
Board Weight 230g



Product Manuals / Spec Sheets / Downloads:

To download product brochure, Please Click Here.

To download product images, drivers & resources, Please Click Here.

To download product Input Ripple - 1A, Please Click Here.

To download product Input Ripple - 3A, Please Click Here.

To download product Output Ripple - 1A, Please Click Here.

To download product Output Ripple - 3A, Please Click Here.

To download product testing at 1W, Please Click Here.

To download product testing at 5W, Please Click Here.

To download product testing at 10W, Please Click Here.

To download product testing at 15W, Please Click Here.

Contact Allo India support:

Need support/help before purchasing? Or if you have any questions regarding their product(s), please Click Here to get telephonic, live or email support from allo India.

Write a review

Your Name:
Your Review:
Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Related Products