Your shopping cart is empty!
-500x500.jpg "Dayton Audio - RS100-4 - 4\" Reference Full-Range Driver 4 Ohm")
-500x500.jpg)
Dayton Audio - RS100-4 - 4" Reference Full-Range Driver 4 Ohm
Price:
4,985.00INR
Ex Tax: 4,985.00INR
Ex Tax: 4,985.00INR
(Dayton Audio - RS100-4 - 4" Reference Full-Range Driver 4 Ohm
Quick Overview:
The Dayton Audio Reference Series sets a new standard of value in high-performance loudspeaker drivers.
Product Highlights:
- Full-range capability
- Long-excursion motor and suspension for strong bass performance
- Subtle yet high-tech look makes a bold cosmetic statement
- Designed and engineered in the USA
- Great replacement for the Dayton RS100S-8 4" Reference Shielded Full-Range Driver
Product Manuals / Spec Sheets / Downloads:
Dayton Audio RS100-4 Specification Sheet, Please Click here.
Product Description:
The Dayton Reference Series sets a new standard of value in high-performance loudspeaker drivers. Utilizing a low-distortion motor system with two short-circuit paths and a rigid aluminum cone, the Reference Series can outperform drivers that cost several times the price. Their low-distortion characteristics and high excursion capabilities provide exceptional clarity, detail, and dynamics. Woofer features a black anodized cone, heavy-duty 6-hole cast frame, low-loss rubber surround, solid aluminum phase plug, rubber magnet boot, and gold terminals.
*Optimum Cabinet Size:
Sealed Volume 0.03 ft.³
Sealed F3 143 Hz
Vented Volume 0.1 ft.³
Vented F3 72 Hz
* Enclosure volume/F3s based on BassBox "optimum" calculations
|
PRODUCT SPECIFICATIONS |
|
|---|---|
| Speaker Type | Full Range |
| Nominal Diameter | 4" |
| Power Handling (RMS) | 30 watts |
| Power Handling (max) | 60 watts |
| Impedance | 4 ohms |
| Sensitivity | 84.2 dB @ 1W/1m |
| Frequency Response | 80 - 20,000 Hz |
| Voice Coil Diameter | 26 mm |
THIELE-SMALL PARAMETERS |
|
| DC Resistance (Re) | 3.0 ohms |
| Voice Coil Inductance (Le) | 0.67 mH |
| Resonant Frequency (Fs) | 80.2 Hz |
| Mechanical Q (Qms) | 3.1 |
| Electromagnetic Q (Qes) | 0.57 |
| Total Q (Qts) | 0.48 |
| Diaphragm Mass Inc. Airload (Mms) | 3.90 g |
| Mechanical Compliance of Suspension (Cms) | 1.00 mm/N |
| Surface Area Of Cone (Sd) | 37.4 cm² |
| Volume of Displacement (Vd) | 15.0 cm³ |
| BL Product (BL) | 3.22 Tm |
| Compliance Equivalent Volume (Vas) | 2.0 liters |
| Maximum Linear Excursion (Xmax) | 4.0 mm |
MATERIALS OF CONSTRUCTION |
|
| Cone / Diaphragm Material | Black Anodized Aluminum Cone |
| Surround Material | Rubber |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Aluminum |
| Dual Voice Coil | No |
| Basket/Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
| Shielded | No |
MOUNTING INFORMATION |
|
| Overall Outside Diameter | 98 mm |
| Overall Depth | 51 mm |
| Baffle Cutout Diameter | 77.2 mm |
| # Mounting Holes | 6 |
Loudspeaker projects with this driver:
Write a review
Your Name:
Your Review:
Note: HTML is not translated!Rating: Bad Good
Enter the code in the box below:
Related Products
-80x80.jpg)
-80x80.jpg)