Your shopping cart is empty!
SB Acoustics SB29RDNC-C000-4 Neo Magnet Ring Dome Tweeter
Price:
5,330.00INR
Ex Tax: 5,330.00INR
Ex Tax: 5,330.00INR
(SB Acoustics SB29RDNC-C000-4 Neo Magnet Ring Dome Tweeter
Overview:
This tweeter features a proprietary fabric ring dome with a large roll surround. Stabilizing the center of the dome greatly reduces distortion and brings the acoustic center of the tweeter back to the voice coil, with the added benefit of increased sensitivity. The tweeter has a chambered back designed to provide a lower resonance frequency and reduce back wave reflections from the dome. A copper cap is used on the pole piece.
Highlights:
- Non-resonant diaphragm design for minimum high frequency break-up
- CCAW voice coil for low moving mass
- Long life silver lead wires
- Low resonance frequency
- Copper cap on pole piece for reduced voice coil inductance and minimum phase shift
- Inherently shielded neodymium motor system
- Internal pressure equalization and flow resistor for non-resonant coupling of cavities
- Compact design
Product Specification:
|
Nominal Impedance |
4 ohms |
|
DC resistence,Re |
3 ohms |
|
voice coil inductance ,Le |
0.05 mH |
|
Free air resonance ,Fs |
680 Hz |
|
Sensitivity(2.83V/1m) |
94 dB |
|
Mechanical Q-factor ,Qms |
1.2 |
|
Electrical Q-factor ,Qes |
0.72 |
|
Total Q-factor ,Qts |
0.45 |
|
Moving mass incl. air,Mms |
0.45 g |
|
Force factor,BI |
2.4 Tm |
|
Rated power handling* |
100 W |
|
Effective piston area,Sd |
9.6 cm² |
|
Voice coil diameter |
29 mm |
|
Voice coil height |
2 mm |
|
Air gap height |
2.5 mm |
|
Linear coil travel(p-p) |
0.5 mm |
|
Magnetic flux density |
1.2 T |
|
Magnetic weight |
31 gms |
|
Net weight |
0.17 Kg |
Product Manuals / Spec Sheets / Downloads:
Specifications data sheet click here
Write a review
Your Name:
Your Review:
Note: HTML is not translated!Rating: Bad Good
Enter the code in the box below:
Related Products
