Your shopping cart is empty!
SB Audience NERO-15SW800 Subwoofer
Price:
27,057.00INR
Ex Tax: 27,057.00INR
Ex Tax: 27,057.00INR
(SB Audience NERO-15SW800 Subwoofer
Highlights:
- Proprietary cone paper material with silk cotton tree and manila pulp
- Minimum damping fiber glass voice coil former
- 4.5" voice coil with APC (Advanced Polymer Coating)
- Cast aluminium chassis
- Vented pole piece for reduced compression
- Double spider for high stability suspension
- Cooling device on head yoke for increased heat transfer
Product Specification:
|
Nominal Impedance |
8 Ohm |
|
Minimum Impedance |
5.2 Ohm |
|
AES Power Handling (1) |
800 W |
|
Maximum Power Handling (2) |
1600 W |
|
Sensitivity (1W/1m) |
96 dB |
|
Frequency Range |
31-2500 Hz |
|
Voice Coil Diameter |
113 mm (4.5 in) |
|
Winding Material |
Copper |
|
Former Material |
FIBSV |
|
Winding Depth |
33.2 mm |
|
Magnetic Gap Depth |
14 mm (0.55 in) |
|
Flux Density |
0.93 T |
|
Magnet |
Ferrite |
|
Basket Material |
Aluminium die cast |
|
Demodulation |
Aluminium cooling device |
|
Cone Surround |
Triple roll |
|
NET Air Volume filled by driver |
6.45 liters |
|
Spider Profile |
Dual constant height waves |
|
Weather Resistant |
Yes |
Thiele Parameters
|
Fs |
31 Hz |
|
Re |
5.3 Ohm |
|
Qes |
0.36 |
|
Qms |
7.59 |
|
Qts |
0.34 |
|
Vas |
137 liters |
|
Sd |
860.5 cm2 |
|
Xmax (3) |
14.27 mm |
|
Xdamage (4) |
30 mm |
|
Mms |
207.2 g |
|
BI |
24.4 Tm |
|
Le |
2.08 mH |
|
Cms |
0.13 mm/N |
|
Rms |
5.25 Kg/s |
|
Eta Zero |
1.05 % |
|
EBP |
86 |
Dimensions & Weight
|
Diameter |
404 mm (18.5 in) |
|
Bolt Circle Diameter |
380 mm (17.9 in) |
|
Baffle cutout Diameter |
361.4 mm (16.77 in) |
|
Mounting Depth |
177.7 mm(7.69 in) |
|
Net Weight |
16.34 kg (25.68 lb) |
|
Shipping Box |
425 X 425 X 232 mm (16.72*16.74*9.13in) |
|
Gross Weight |
18 Kg(26.45 lb) |
|
Flange and Gasket Thickness |
15 mm (0.53 in) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement Syste
Product Manuals / Spec Sheets / Downloads: Please Click Here.
Note:Shipping charges may vary based on Area/Weight of the product so kindly contact us before placing the order
Write a review
Your Name:
Your Review:
Note: HTML is not translated!Rating: Bad Good
Enter the code in the box below:
 (1)-80x80.jpg)
