Your shopping cart is empty!
SB Audience NERO-6MRN150D 6" Midrange
Price:
15,830.00INR
Ex Tax: 15,830.00INR
Ex Tax: 15,830.00INR
(SB Audience NERO-6MRN150D 6" Midrange
Features:
- Proprietary cone paper material with graphite
- Flat foam surround for best midrange reproduction
- High grade neodymium magnet
- Shorting ring in motor system for reduced distortion
- CCAW voice coil for reduced moving mass
- Minimum damping fiber glass voice coil former
- Cast aluminium chassis
Product Specification:
|
Nominal Impedance |
8 Ohm |
|
Minimum Impedance |
5.6 Ohm |
|
AES Power Handling (1) |
150 W |
|
Maximum Power Handling (2) |
300 W |
|
Sensitivity (1W/1m) |
98 dB |
|
Frequency Range |
200 to 10600 Hz |
|
Voice Coil Diameter |
49.5 mm (2 in) |
|
Winding Material |
Copper clad aluminium |
|
Former Material |
Till |
|
Winding Depth |
8.85 mm |
|
Magnetic Gap Depth |
6 mm (0.55 in) |
|
Flux Density |
1.74 T |
|
Magnet |
Neodymium |
|
Basket Material |
Aluminium die cast |
|
Demodulation |
Aluminium shorting ring |
|
Cone Surround |
Flat foam |
|
NET Air Volume filled by driver |
0.44 liters |
|
Spider Profile |
Single constant height waves |
|
Weather Resistant |
Yes |
Thiele Parameters
|
Fs |
200 Hz |
|
Re |
5.6 Ohm |
|
Qes |
0.58 |
|
Qms |
2.96 |
|
Qts |
0.48 |
|
Vas |
1.1 liters |
|
Sd |
136.8 cm2 |
|
Xmax (3) |
3.43 mm |
|
Xdamage (4) |
8 mm |
|
Mms |
13.8 g |
|
BI |
13.1 Tm |
|
Le |
0.28 mH |
|
Cms |
0.04 mm/N |
|
Rms |
6 Kg/s |
|
Eta Zero |
1.66 % |
|
EBP |
345 |
Dimensions & Weight
|
Diameter |
162.7 mm (6.40 in) |
|
Bolt Circle Diameter |
168.5 mm (6.63 in) |
|
Baffle cutout Diameter |
147.5 mm (5.8 in) |
|
Mounting Depth |
73 mm (2.87 in) |
|
Net Weight |
1.6 kg (25.68 lb) |
|
Shipping Box |
194 X 194 X 112 mm (7.63*7.63*4.40 in) |
|
Gross Weight |
1.9 Kg (4.18 lb) |
|
Flange and Gasket Thickness |
7.5 mm (0.29 in) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
Product Manuals / Spec Sheets / Downloads: Please Click Here.
Note:Shipping charges may vary based on Area/Weight of the product so kindly contact us before placing the order
Write a review
Your Name:
Your Review:
Note: HTML is not translated!Rating: Bad Good
Enter the code in the box below:
Related Products
-80x80.jpg)
 (1)-80x80.jpg)
