Your shopping cart is empty!
SB Audience Rosso-18SW1000D 18" Subwoofer
Price:
27,913.00INR
Ex Tax: 27,913.00INR
Ex Tax: 27,913.00INR
(SB Audience Rosso-18SW1000D 18" Subwoofer
Highlights:
- Proprietary cone paper material with silk cotton tree
- Double spider for high stability suspension
- Shorting ring in motor system for reduced distortion
- Cooling device on yoke for improved heat transfer
- 4.5" voice coil with APC (Advanced Polymer Coating)
- AISVW voice coil wire for high power handling
- Cast aluminium chassis
Product Specification:
|
Nominal Impedance |
8 Ohm |
|
Minimum Impedance |
5.2Ohm |
|
AES Power Handling (1) |
1000 W |
|
Maximum Power Handling (2) |
2000 W |
|
Sensitivity (1W/1m) |
98 dB |
|
Frequency Range |
35 - 3400 Hz |
|
Voice Coil Diameter |
113 mm (4.5in) |
|
Winding Material |
AISV COPPER WIRE |
|
Former Material |
FIBSV |
|
Winding Depth |
33.2 mm |
|
Magnetic Gap Depth |
14mm (0.55 in) |
|
Flux Density |
0.93 T |
|
Magnet |
Ferrite |
|
Basket Material |
Aluminium die cast |
|
Demodulation |
- |
|
Cone Surround |
Triple roll |
|
NET Air Volume filled by driver |
9.46 liters |
|
Spider Profile |
Double constant height waves |
|
Weather Resistant |
yes |
Thiele Parameters:
|
Fs |
35 Hz |
|
Re |
5.3 Ohm |
|
Qes |
0.49 |
|
Qms |
10.13 |
|
Qts |
0.46 |
|
Vas |
164.3 liters |
|
Sd |
1256.6 cm2 |
|
Xmax (3) |
13.67 mm |
|
Xdamage (4) |
25 mm |
|
Mms |
276 g |
|
BI |
25.8 Tm |
|
Le |
1.64 mH |
|
Cms |
0.07 mm/N |
|
Rms |
6.05 Kg/s |
|
Eta Zero |
1.44 % |
|
EBP |
71 |
Dimensions & Weight:
|
Overall Diameter |
483mm (19.0 in) |
|
Bolt Circle Diameter |
456 mm (18.0 in) |
|
Baffle cutout Diameter |
428mm (16.85 in) |
|
Mounting Depth |
218.7 mm (8.61 in) |
|
Net Weight |
17 kg (37.4 lb) |
|
Shipping Box |
498 X 498 X 270 mm |
|
Gross Weight |
19.7 Kg (43.43 lb) |
|
Flange and Gasket Thickness |
16.5 mm (0.64 in) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
Product Manuals / Spec Sheets / Downloads:
Specifications Please Click Here.
Note:Shipping charges may vary based on Area/Weight of the product so kindly contact us before placing the order
Write a review
Your Name:
Your Review:
Note: HTML is not translated!Rating: Bad Good
Enter the code in the box below:
Related Products
 (1)-80x80.jpg)
