Dayton Audio KABD-430 4 x 30W All-in-one Amplifier Board with DSP and Bluetooth

Overview:

Dayton Audio KABD-430 combines a 4 x 30W amp board, Bluetooth 5.0, and an ADAU1701 digital signal processor all in one amp board. This enables you to customize your next DIY audio project’s sound using SigmaStudio software and Dayton Audio ICP1 or KPX Bluetooth programmer.

Key Features :

• All-in-one board design reduces space needed for audio DIY projects
• Wire harnesses make installation quick and simple with no soldering required — includes power, Bluetooth reset button and two sets of speaker cables
• Separate ports for powering by battery or direct DC input from 12 to 24V power source
• Program with SigmaStudio software and Dayton Audio ICP1 or KPX boards (sold separately)
• Efficient 4 x 30W of power from the two TPA3118 amp chips delivers clean powerful signal for creating up to 4-channel audio projects
• 5-year Dayton Audio warranty

Technical Specification:

• Power output (w/ 24 VDC power supply): 2 x 30W @ 8 ohms
• SNR: 96 dB 2 x 30W @ 8 ohm, THD+N=1%, 25.8 dB, A-weighting
• THD+N: 0.08% 10W @ 8 ohm 1 kHz 25.8 dB
• Frequency response: 20 to 20,000 Hz (±3 dB)
• Impedance: 3.2-8 ohms
• Recommended power supply: 12 to 24 VDC, 3A
• Board mounting holes center to center spacing: 3.32″ x 2.4″ (84 x 61 mm)
• Hole diameter: 0.14″ (3.5 mm)
• Dimensions: 3.6″ L x 2.7″ W x 0.9″ H

Dayton Audio KABD-430 User Manual

Dayton Audio KABD-430 Quick Reference Guide

Dayton Audio KABD Series SigmaStudio Programming Guide

Dayton Audio KABD Series SigmaStudio Example Projects