Programmable Digital Timer – Frontier

Digital Programmable

Daily, Weekly Timer

Multipurpose

 

1) 8 ON/OFF program per day

2) Power:DC 12V 24V AC110-240V

3) CR2032 Battery for memory back

 

Timers are used whenever electrical equipment must be periodically switched on and off at preprogrammed daily or weekly times. The programmed events are then repeated during the next periods accordingly. They find broad application in heating and refrigerating systems, boilers, ovens, dryers, defrosting equipment, swimming pools, hatcheries, illumination, etc.

 

* Digital Electronics time switch with daily and weekly programs

* LED power indicator

* LCD on screen displays ON and OFF switching status

* With lithium battery for memory back up

* With daily weekly and impulse programs

* The impulse program can also be combined with daily and weekly programs

* With operation manual

 

Supply Voltage: 200-250VAC

 

Frequency: 50 ~ 60Hz

 

Contact: Single Pole –  Single Throw, 30 A, 250 V AC

 

Running Accuracy: ± 1 second / day at 20 degree C

 

Minimum Time Setting – 1 minute

 

Load – Resistive 16A, Inductive 8A, Motor 2HP

 

Memory Back up – Lithium battery CR2032

 

 

 

 

Clock: Current time setting or show current time.

Timer: Press this button to enter program mode. There are 8 on / 8 off programs lines.

Day: Sets the day of the week.

Hour: Sets the hour button. 24 HOUR MILITARY TIME

Min: Set the minute button.

Manual: ON/AUTO/OFF select mode.

RESET Cancel all settings. It is the recessed button

next to the circled P with a X through it.

Use ballpoint pen to push it.

ON: RED LED indicator lamp . LED light on when the

internal switch is turned on.

 

I: SET CURRENT TIME AND DAY

1. Press CLOCK and DAY buttons together. Pulse the DAY Button to advance to current day.

2. Press CLOCK and HOUR buttons together. Pulse the HOUR button to advance to current Hour.

3. Press CLOCK and MIN buttons together. Pulse the MIN button to advance to current time.

4. After setting the day and time, the seconds will

automatically reset.

 

II: SET PROGRAMS

1. Press TIMER button once "1ON" will appear at the left side of display. This is the "1" program that you desire the device to turn on.

2. Press DAY button to select the program period.

3. Press HOUR button to set hour. Press MIN button to set minute.

 

5. After setting the "1ON" program. then press TIMER

 

button again "1OFF" will appear. this is the "1"

program that you desire the device to turn off.

 

6. Repeat the same procedure until "1OFF" program is set.

7. Your timer gives you up to 8 different ON and 8

different OFF per program period. You can use all 8

settings per period, or as few as required.

 

III: REVIEW SET PROGRAMS

1. Pulse TIMER button to advance displayed to each

subsequent ON or OFF settings.

2. To make changes follow instructions under " SET

PROGRAMS".

3. Push CLOCK button to return to current time dispay.

 

IV: MANUAL OVERRIDE BUTTON

1. Pulse MANUAL button to select ON/AUTO/OFF

mode.

2. ON mode turns on the device and it will stay on until manually turned to OFF or AUTO. OFF mode turns off the device. and it will stay OFF until manually turned to ONor AUTO.

( YOU CAN USE THIS TO TURN ON THE GENERATOR)

3. In AUTO mode. It will turn ON or turn OFF according to the programs for which the timer is set.

4. MANUAL OVERRIDE FEATURE: Turn device ON

if already OFF or OFF if already ON. Timer

automatically resumes program on next programned

cycle. (From ON to AUTO mode, it will stay on until the next programmed OFF timeam). (From OFF to AUTO mode, it will stay OFF until next programmed ON time)

 

1. Installation must be according to wire diagram. See the back of the unit.

2. Press RESET button before use.

3. Recharge the battery when no indication appears in the display.