SB Acoustics SB16PFCR25-8 6” Paper Cone Woofer
₹2,706.00
Out of stock
SB Acoustics SB16PFCR25-8 6” Paper Cone Woofer
Highlights:
- Vented reinforced plastic chassis
- Proprietary cone material with natural fibers made in-house
- Soft low damping rubber surround for improved transient response
- Optimized motor system
- Vented coil former for low compression
- Non-resonant long life lead wires
Product Specification:
Nominal Impedance | 8 ohms |
DC resistence,Re | 5.6 ohms |
voice coil inductance,Le | 0.77 mH |
Free air resonance,Fs | 38 Hz |
Sensitivity(2.83V/1m) | 87 dB |
Mechanical Q-factor,Qms | 2.5 |
Electrical Q-factor,Qes | 0.48 |
Total Q-factor,Qts | 0.40 |
Moving mass incl. air,Mms | 13.8 g |
Force factor,BI | 6.2 Tm |
Equivalent volume,Vas | 27 liters |
Compliance,Cms | 1.25 mm/N |
Mechanical loss,Rms | 1.4 Kg/s |
Rated power handling* | 40W |
Effective piston area,Sd | 124 cm² |
Voice coil diameter | 25.4 mm |
Voice coil height | 14 mm |
Air gap height | 5 mm |
Linear coil travel(p-p) | 9 mm |
Magnetic flux density | 1.07 T |
Magnetic weight | 0.36 Kg |
Net weight | 0.96 Kg |
Suggested Box alignments:
- Sealed box of 0.2 to 0.25 cubic feet (5.5 liters to 7 liters) should have a response of 3dB down on the low end of about 80Hz.
- A ported enclosure of 0.35 cubic feet (10 liters) with a 1.5″ diameter vent by 4″ long should have a 3dB down point of about 55Hz.
- A ported enclosure of 0.5 cubic feet (14 liters) with a 2″ diameter vent by 7″ long should have a 3dB down point of about 48Hz.
Product Manuals / Spec Sheets / Downloads: Specifications Please Click Here.
| Weight | 1280 g |
|---|---|
| Dimensions | 22 × 22 × 13 cm |
| Brand | |
| JAN |
Only logged in customers who have purchased this product may leave a review.
Related products
Midrange / Midbass
Midrange / Midbass
Midrange / Midbass
Midrange / Midbass
Midrange / Midbass
Midrange / Midbass
HiVi D6.8MKII 6.5″ Hi – end Aluminium Cone Midbass Woofer 8Ohm – Pair
Reviews
There are no reviews yet.