SB Audience Bianco-10MW150 10″ Mid-woofer
Highlights:
- Proprietary cone paper material with linter pulp
- 4″ voice coil with APC (Advanced Polymer Coating)
- Vented back plate for reduced compression
- Minimum damping fiber glass voice coil former
- Weather-proof coated conepaper
- Long life silver lead wires
Product Specifications:
Nominal Impedance | 8 Ohm |
Minimum Impedance | 5.2Ohm |
AES Power Handling (1) | 150 W |
Maximum Power Handling (2) | 300 W |
Sensitivity (1W/1m) | 100 dB |
Frequency Range | 65- 5000 Hz |
Voice Coil Diameter | 60.5 mm (0.98in) |
Winding Material | Copper |
Former Material | Till |
Winding Depth | 13.92 mm |
Magnetic Gap Depth | 8mm (0.31 in) |
Flux Density | 1.23 T |
Magnet | Ferrite |
Basket Material | Stamped steel |
Demodulation | – |
Cone Surround | Double half roll with damping glue |
NET Air Volume filled by driver | 3.16 liters |
Spider Profile | Single downroll constant height waves |
Weather Resistant | yes |
Thiele Parameters:
Fs | 65 Hz |
Re | 5.1 Ohm |
Qes | 0.4 |
Qms | 12.08 |
Qts | 0.39 |
Vas | 25.8 liters |
Sd | 366.4 cm2 |
Xmax (3) | 5.63 mm |
Xdamage (4) | 20 mm |
Mms | 44.4 g |
BI | 15.1 Tm |
Le | 0.64 mH |
Cms | 0.14 mm/N |
Rms | 1.5Kg/s |
Eta Zero | 1.67 % |
EBP | 163 |
Dimensions & Weight:
Diameter | 258mm (10.2 in) |
Bolt Circle Diameter | 248 mm (9.76 in) |
Baffle cutout Diameter | 229mm (9.01 in) |
Mounting Depth | 114 mm (4.48 in) |
Net Weight | 4.9 kg (10.8 lb) |
Shipping Box | 289 X 289 X 157 mm |
Gross Weight | 5.64 Kg (12.43 lb) |
Flange and Gasket Thickness | 9.12 mm (0.35 in) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
Bianco-10MW150 Specifications Please Click Here.
Reviews
There are no reviews yet.