SB Audience BIANCO-15SW400 15″ Sub-woofer
Highlights:
- Proprietary cone paper material with silk cotton tree
- 4″ voice coil with APC (Advanced Polymer Coating)
- Cast aluminium chassis
- Corrugation cone paper for improved durability
- Minimum damping fiber glass voice coil former
- Vented back plate for reduced compression
Product Specifications:
Nominal Impedance | 8 Ohm |
Minimum Impedance | 5.6Ohm |
AES Power Handling (1) | 400 W |
Maximum Power Handling (2) | 800 W |
Sensitivity (1W/1m) | 99 dB |
Frequency Range | 41 – 2500 Hz |
Voice Coil Diameter | 99.2 mm (4in) |
Winding Material | Copper |
Former Material | Till |
Winding Depth | 21.75 mm |
Magnetic Gap Depth | 10mm (0.39 in) |
Flux Density | 1.02 T |
Magnet | Ferrite |
Basket Material | Aluminium die cast |
Demodulation | – |
Cone Surround | Double half surround |
NET Air Volume filled by driver | 4.69 liters |
Spider Profile | Single constant height waves |
Weather Resistant | yes |
Thiele Parameters:
Fs | 41 Hz |
Re | 5.5 Ohm |
Qes | 0.49 |
Qms | 22.45 |
Qts | 0.48 |
Vas | 111.5 liters |
Sd | 845 cm2 |
Xmax (3) | 9.2 mm |
Xdamage (4) | 19 mm |
Mms | 134.1 g |
BI | 19.8Tm |
Le | 1.29 mH |
Cms | 0.11 mm/N |
Rms | 1.55 Kg/s |
Eta Zero | 1.54 % |
EBP | 84 |
Dimensions & Weight:
Diameter | 394mm (15.5 in) |
Bolt Circle Diameter | 375 mm (14.76 in) |
Baffle cutout Diameter | 356mm (14.01 in) |
Mounting Depth | 133.5 mm (5.94 in) |
Net Weight | 9.8 kg (21.60 lb) |
Shipping Box | 428 X 428 X 209 mm |
Gross Weight | 11.6 Kg (25.57 lb) |
Flange and Gasket Thickness | 17.5 mm (0.68 in) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
BIANCO-15SW400 Specifications Please Click here
Reviews
There are no reviews yet.