SB Audience NERO-12MWN400D 12″ Mid-woofer 8Ohm
Highlights:
- Proprietary cone paper material with manila pulp
- Strong neodymium motor
- 3″ voice coil with APC (Advanced Polymer Coating)
- Interleaved Sandwich Voice Coil technology
- Cast aluminium chassis
- Minimum damping fiber glass voice coil former
- Copper sleeve for low inductance and reduced distortion.
Product Specification:
| Nominal Impedance | 8 Ohm | 
| Minimum Impedance | 5.3 Ohm | 
| AES Power Handling (1) | 400 W | 
| Maximum Power Handling (2) | 800 W | 
| Sensitivity (1W/1m) | 96 dB | 
| Frequency Range | 66 – 6000 Hz | 
| Voice Coil Diameter | 75.6 mm (23 in) Interleaved Sandwich | 
| Winding Material | Copper | 
| Former Material | Till | 
| Winding Depth | 17.6 mm | 
| Magnetic Gap Depth | 10 mm (0.39 in) | 
| Flux Density | 1.07 T | 
| Magnet | Neodymium | 
| Basket Material | Aluminium die cast | 
| Cone Sorround | Triple roll with damping glue | 
| NET Air Volume filled by driver | 2.15 liters | 
| Demodulation | Extendend copper cap | 
| Spider Profile | Single constant height waves | 
| Weather Resistant | yes | 
Thiele Parameters:
| Fs | 66 Hz | 
| Re | 5.4 Ohm | 
| Qes | 0.55 | 
| Qms | 8.98 | 
| Qts | 0.52 | 
| Vas | 31.1 liters | 
| Sd | 543.3 cm2 | 
| Xmax (3) | 7.13 mm | 
| Xdamage (4) | 16 mm | 
| Mms | 78.8 g | 
| BI | 17.8 Tm | 
| Le | 0.19 mH | 
| Cms | 0.07 mm/N | 
| Rms | 3.63 Kg/s | 
| Eta Zero | 1.55 % | 
| EBP | 120 | 
Dimensions & Weight:
| Overall Diameter | 322.5 mm (12.6 in) | 
| Bolt Circle Diameter | 306.5 mm (12.06 in) | 
| Baffle cutout Diameter | 287 mm (11.29 in) | 
| Mounting Depth | 133 mm (5.24 in) | 
| Net Weight | 4.15 kg (9.15 lb) | 
| Shipping Box | 354 X 354X 182 mm | 
| Gross Weight | 5.3Kg (11.68 lb) | 
| Flange and Gasket Thickness | 12mm (0.47 in) | 
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
NERO-12MWN400D Specifications Please Click Here.
Delivery charges may vary based on Area/Weight of the product






 
				
 
				
 
				
 
				
 
				
 
				
 
				
 
				
Reviews
There are no reviews yet.