SB Audience NERO-6MRN150D 6″ Woofer 8Ohm
₹15,830.00
10 in stock
SB Audience NERO-6MRN150D 6″ Woofer 8Ohm
Features:
- Proprietary cone paper material with graphite
- Flat foam surround for best midrange reproduction
- High grade neodymium magnet
- Shorting ring in motor system for reduced distortion
- CCAW voice coil for reduced moving mass
- Minimum damping fiber glass voice coil former
- Cast aluminium chassis
Product Specification:
Nominal Impedance | 8 Ohm |
Minimum Impedance | 5.6 Ohm |
AES Power Handling (1) | 150 W |
Maximum Power Handling (2) | 300 W |
Sensitivity (1W/1m) | 98 dB |
Frequency Range | 200 to 10600 Hz |
Voice Coil Diameter | 49.5 mm (2 in) |
Winding Material | Copper clad aluminium |
Former Material | Till |
Winding Depth | 8.85 mm |
Magnetic Gap Depth | 6 mm (0.55 in) |
Flux Density | 1.74 T |
Magnet | Neodymium |
Basket Material | Aluminium die cast |
Demodulation | Aluminium shorting ring |
Cone Surround | Flat foam |
NET Air Volume filled by driver | 0.44 liters |
Spider Profile | Single constant height waves |
Weather Resistant | Yes |
Thiele Parameters:
Fs | 200 Hz |
Re | 5.6 Ohm |
Qes | 0.58 |
Qms | 2.96 |
Qts | 0.48 |
Vas | 1.1 liters |
Sd | 136.8 cm2 |
Xmax (3) | 3.43 mm |
Xdamage (4) | 8 mm |
Mms | 13.8 g |
BI | 13.1 Tm |
Le | 0.28 mH |
Cms | 0.04 mm/N |
Rms | 6 Kg/s |
Eta Zero | 1.66 % |
EBP | 345 |
Dimensions & Weight:
Diameter | 162.7 mm (6.40 in) |
Bolt Circle Diameter | 168.5 mm (6.63 in) |
Baffle cutout Diameter | 147.5 mm (5.8 in) |
Mounting Depth | 73 mm (2.87 in) |
Net Weight | 1.6 kg (25.68 lb) |
Shipping Box | 194 X 194 X 112 mm (7.63*7.63*4.40 in) |
Gross Weight | 1.9 Kg (4.18 lb) |
Flange and Gasket Thickness | 7.5 mm (0.29 in) |
NERO-6MRN150D Drawing:
NERO-6MRN150D Grafik:
Note :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
NERO-6MRN150D Specifications Please Click Here
Note: Shipping charges may vary based on Area/Weight of the product so kindly contact us before placing the order
| Weight | 1600 g |
|---|---|
| Dimensions | 162.7 × 145.5 × 78.5 cm |
| JAN | |
| Speaker Size | 6" |
| Speaker Type | |
| Impedance |
Only logged in customers who have purchased this product may leave a review.
Related products
Reviews
There are no reviews yet.