SB Audience Rosso-18SW1000D 18″ Subwoofer
₹27,913.00
7 in stock
SB Audience Rosso-18SW1000D 18″ Subwoofer
Highlights:
- Proprietary cone paper material with silk cotton tree
- Double spider for high stability suspension
- Shorting ring in motor system for reduced distortion
- Cooling device on yoke for improved heat transfer
- 5″ voice coil with APC (Advanced Polymer Coating)
- AISVW voice coil wire for high power handling
- Cast aluminium chassis
Product Specification:
Nominal Impedance | 8 Ohm |
Minimum Impedance | 5.2Ohm |
AES Power Handling (1) | 1000 W |
Maximum Power Handling (2) | 2000 W |
Sensitivity (1W/1m) | 98 dB |
Frequency Range | 35 – 3400 Hz |
Voice Coil Diameter | 113 mm (4.5in) |
Winding Material | AISV COPPER WIRE |
Former Material | FIBSV |
Winding Depth | 33.2 mm |
Magnetic Gap Depth | 14mm (0.55 in) |
Flux Density | 0.93 T |
Magnet | Ferrite |
Basket Material | Aluminium die cast |
Demodulation | – |
Cone Surround | Triple roll |
NET Air Volume filled by driver | 9.46 liters |
Spider Profile | Double constant height waves |
Weather Resistant | yes |
Thiele Parameters:
Fs | 35 Hz |
Re | 5.3 Ohm |
Qes | 0.49 |
Qms | 10.13 |
Qts | 0.46 |
Vas | 164.3 liters |
Sd | 1256.6 cm2 |
Xmax (3) | 13.67 mm |
Xdamage (4) | 25 mm |
Mms | 276 g |
BI | 25.8 Tm |
Le | 1.64 mH |
Cms | 0.07 mm/N |
Rms | 6.05 Kg/s |
Eta Zero | 1.44 % |
EBP | 71 |
Dimensions & Weight:
Overall Diameter | 483mm (19.0 in) |
Bolt Circle Diameter | 456 mm (18.0 in) |
Baffle cutout Diameter | 428mm (16.85 in) |
Mounting Depth | 218.7 mm (8.61 in) |
Net Weight | 17 kg (37.4 lb) |
Shipping Box | 498 X 498 X 270 mm |
Gross Weight | 19.7 Kg (43.43 lb) |
Flange and Gasket Thickness | 16.5 mm (0.64 in) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
Rosso-18SW1000D Specifications Please Click Here
Note: Shipping charges may vary based on Area/Weight of the product so kindly contact us before placing the order
| Weight | 17000 g |
|---|---|
| Dimensions | 483 × 426 × 235.2 cm |
| Brand | |
| JAN |
Only logged in customers who have purchased this product may leave a review.
Related products
Dayton Audio
In-Wall Speaker
Reviews
There are no reviews yet.