SB Audience Rosso-18SW750 18″ Subwoofer
₹23,625.00
11 in stock
SB Audience Rosso-18SW750 18″ Subwoofer
Highlights:
- Proprietary cone paper material with silk cotton tree
- Minimum damping fiber glass voice coil former
- 5″ voice coil with APC (Advanced Polymer Coating)
- Ribbon voice coil wire for high efficiency
- Cast aluminium chassis
- Vented back plate for reduced compression
Product Specification:
Nominal Impedance | 8 Ohm |
Minimum Impedance | 5.2Ohm |
AES Power Handling (1) | 750 W |
Maximum Power Handling (2) | 1500 W |
Sensitivity (1W/1m) | 99 dB |
Frequency Range | 36 – 4100 Hz |
Voice Coil Diameter | 113 mm (4.5in) |
Winding Material | Flat Copper Clad Aluminium |
Former Material | FIBSV |
Winding Depth | 22.3 mm |
Magnetic Gap Depth | 14mm (0.55 in) |
Flux Density | 0.93 T |
Magnet | Ferrite |
Basket Material | Aluminium die cast |
Demodulation | – |
Cone Surround | Double Half roll |
NET Air Volume filled by driver | 9.66 liters |
Spider Profile | Double constant height waves |
Weather Resistant | yes |
Thiele Parameters:
Fs | 36 Hz |
Re | 5.1 Ohm |
Qes | 0.45 |
Qms | 10.5 |
Qts | 0.43 |
Vas | 206.9 liters |
Sd | 1256.6 cm2 |
Xmax (3) | 8.82 mm |
Xdamage (4) | 20 mm |
Mms | 212.4 g |
BI | 23.3 Tm |
Le | 1.59 mH |
Cms | 0.09 mm/N |
Rms | 4.56 Kg/s |
Eta Zero | 2.03 % |
EBP | 80 |
Dimensions & Weight:
Overall Diameter | 483mm (19.0 in) |
Bolt Circle Diameter | 456 mm (17.94 in) |
Baffle cutout Diameter | 428mm (16.85 in) |
Mounting Depth | 213.5 mm (8.40 in) |
Net Weight | 16.34 kg (36.02 lb) |
Shipping Box | 498 X 498 X 270 mm |
Gross Weight | 19 Kg (41.88 lb) |
Flange and Gasket Thickness | 16.5 mm (0.65 in) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
Rosso-18SW750 Specifications Please Click Here.
Note: Shipping charges may vary based on Area/Weight of the product so kindly contact us before placing the order
| Weight | 12700 g |
|---|---|
| Dimensions | 470 × 423 × 420 cm |
| Brand | |
| JAN |
Only logged in customers who have purchased this product may leave a review.
Related products
Midrange / Midbass
Dayton Audio ND105-8 4″ Aluminum Cone Midbass Neo Driver 8 Ohm
In-Wall Speaker
Dayton Audio ME825W 8″ Micro-Edge 2-Way In-Wall Speaker Pair
Reviews
There are no reviews yet.