SB Audience Rosso-18SW800 18″ Subwoofer 8Ohm
Highlights:
- Proprietary cone paper material with silk cotton tree
- Minimum damping fiber glass voice coil former
- 4″ voice coil with APC (Advanced Polymer Coating)
- Ribbon voice coil wire for high efficiency
- Cast aluminium chassis
- Vented back plate for reduced compression
- Cooling device on yoke for increased heat transfer
Product Specification:
| Nominal Impedance | 8 Ohm | 
| Minimum Impedance | 5.2Ohm | 
| AES Power Handling (1) | 800 W | 
| Maximum Power Handling (2) | 1600 W | 
| Sensitivity (1W/1m) | 99 dB | 
| Frequency Range | 33 – 4000 Hz | 
| Voice Coil Diameter | 99.2 mm (4in) | 
| Winding Material | Flat Copper Clad Aluminium | 
| Former Material | FIBSV | 
| Winding Depth | 25.90 mm | 
| Magnetic Gap Depth | 10mm (0.39 in) | 
| Flux Density | 1.03 T | 
| Magnet | Ferrite | 
| Basket Material | Aluminium die cast | 
| Demodulation | Aluminium cooling device | 
| Cone Surround | Double Half roll | 
| NET Air Volume filled by driver | 7.80 liters | 
| Spider Profile | Single constant height waves | 
| Weather Resistant | yes | 
Thiele Parameters:
| Fs | 33 Hz | 
| Re | 5.1 Ohm | 
| Qes | 0.48 | 
| Qms | 9.09 | 
| Qts | 0.46 | 
| Vas | 258.1 liters | 
| Sd | 1256.6 cm2 | 
| Xmax (3) | 11.33 mm | 
| Xdamage (4) | 23 mm | 
| Mms | 200.6 g | 
| BI | 21 Tm | 
| Le | 1.25 mH | 
| Cms | 0.12 mm/N | 
| Rms | 4.59 Kg/s | 
| Eta Zero | 1.86 % | 
| EBP | 69 | 
Dimensions & Weight:
| Overall Diameter | 470mm (18.5 in) | 
| Bolt Circle Diameter | 454 mm (17.94 in) | 
| Baffle cutout Diameter | 425mm (16.73 in) | 
| Mounting Depth | 205.5 mm (8.40 in) | 
| Net Weight | 12.7 kg (27.94 lb) | 
| Shipping Box | 498 X 498 X 270 mm | 
| Gross Weight | 15.4 Kg (33.95 lb) | 
| Flange and Gasket Thickness | 14.5 mm (0.6 in) | 
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
Rosso-18SW800 Specifications Please Click Here.
Note: Delivery charges may vary based on Area/Weight of the product so kindly contact us before placing the order









 
				




 
				
 
				
 
				
 
				
 
				
 
				
 
				
 
				
Reviews
There are no reviews yet.