SB Audience Rosso-65CDN-T Compression Driver-1.4″-neodymium
Highlights:
- Titanium diaphragm
- Neodymium motor assembly
- Copper cap for reduced distortion and extended HF response
- Smooth yet detailed and dynamic character
- High sensitivity and linear frequency response
- Advanced voice coil with flat copper clad aluminum wire
Product Specification:
Nominal Impedance | 8 Ohm |
RDC | 6.2Ohm |
AES Power Handling (1) | 70 W |
Maximum Power Handling (2) | 140 W |
Sensitivity (1W/1m) | 112 dB |
Frequency Range | 500 – 20000 Hz |
Voice Coil Diameter | 65 mm (2.56 in) |
Winding Material | Flat Copper Clad Aluminium |
Former Material | Kapton |
Winding Depth | 1.8 mm (0.07 in) |
Magnetic Gap Depth | 2 mm (0.08 in) |
Flux Density | 1.9 T |
Magnet | Neodymium |
Basket Material | Aluminium die cast |
Demodulation | Copper Cap |
Phase Plug Design | Annular |
Diaphragm Material | Titanium |
Xmax (4) | 0.56 mm (0.02) |
Recommended Crossover Frequency | 1KHZ |
Exit Angle | 18.36 conical |
NET Air Volume filled by HF Driver | 0.33 liters |
Dimensions & Weight:
Throat Diameter | 35.6 mm (1.4 in) |
Overall Diameter | 120 mm (4.72 in) |
90 Mounting Holes Diameter(4*M6) | 102 mm (4.0 in) |
Depth | 53.94 mm (2.12 in) |
Net Weight | 2 kg (4.40 lb) |
Shipping Box | 139 X 121 X 73 mm |
Gross Weight | 2.07 Kg (4.56 lb) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
Rosso-65CDN-T Specifications Please Click Here.
Note: Shipping charges may vary based on Area/Weight of the product so kindly contact us before placing the order
Reviews
There are no reviews yet.