SB Audience ROSSO-6MW150D 6″ Woofer
₹7,900.00
7 in stock
SB Audience ROSSO-6MW150D 6″ Woofer
Features:
- Proprietary cone paper material with manila pulp and graphite
- Proprietary cone coating for controlled breakup
- Extended midrange performance
- Shorting ring in motor system for reduced distortion
- Minimum damping fiber glass voice coil former
- Cast aluminium chassis
Product Specification:
Nominal Impedance | 8 Ohm |
Minimum Impedance | 5.4 Ohm |
AES Power Handling (1) | 150 W |
Maximum Power Handling (2) | 300 W |
Sensitivity (1W/1m) | 94 dB |
Frequency Range | 66 to 5000 Hz |
Voice Coil Diameter | 49.5 mm (2 in) |
Winding Material | Copper |
Former Material | Till |
Winding Depth | 12.15 mm |
Magnetic Gap Depth | 5 mm (0.19 in) |
Flux Density | 1.31 T |
Magnet | Ferrite |
Basket Material | Aluminium die cast |
Demodulation | Aluminium shorting ring |
Cone Surround | Rubber single half roll |
NET Air Volume filled by driver | 0.92 liters |
Spider Profile | Single constant height waves |
Weather Resistant | Yes |
Thiele Parameters:
Fs | 66 Hz |
Re | 5.4 Ohm |
Qes | 0.33 |
Qms | 9.24 |
Qts | 0.32 |
Vas | 8.8 liters |
Sd | 145.3 cm2 |
Xmax (3) | 5.24 mm |
Xdamage (4) | 10 mm |
Mms | 19.4 g |
BI | 11.6 Tm |
Le | 0.39 mH |
Cms | 0.3 mm/N |
Rms | 0.88 Kg/s |
Eta Zero | 0.76 % |
EBP | 200 |
Dimensions & Weight:
Diameter | 162.7 mm (6.40 in) |
Bolt Circle Diameter | 168.5 mm (6.63 in) |
Baffle cutout Diameter | 147.5 mm (5.8 in) |
Mounting Depth | 84 mm (3.30 in) |
Net Weight | 2.62 kg (5.77 lb) |
Shipping Box | 178 X 178 X 135 mm (7.0*7.0*5.31 in) |
Gross Weight | 2.92 Kg (6.43 lb) |
Flange and Gasket Thickness | 5.5 mm (0.21 in) |
NOTES :
(1) AES standard, test made with continuous pink noise signal (6 dbcrest factor ;2hours)
(2) Maximum power is defined as 3dB greater than nominal power.
(3) Xmax=((winding depth-Magnetic gap depth)/2+(Magnetic gap depth/3)
(4) Maximum Excursion (p-p) before permanant damage.
(5) T/S parameters measured on drive units that are broken in using Klippel LPM Measurement System.
ROSSO-6MW150D Specifications Please Click Here
Note: Shipping charges may vary based on Area/Weight of the product so kindly contact us before placing the order
| Weight | 2620 g |
|---|---|
| Dimensions | 162.7 × 145.5 × 94.26 cm |
| JAN |
Only logged in customers who have purchased this product may leave a review.
Related products
Midrange / Midbass
Reviews
There are no reviews yet.