Wavecor SW312WA04 12-1/4″ Reinforced Aluminum Cone Subwoofer 8 Ohm
Overview:
The Wavecor SW312WA04 is a 12-1/4″ aluminum cone subwoofer that was designed to perform equally well in home theater or hi-fi installations. The extremely stiff aluminum cone, the long linear throw, exaggerated ventilation, and the special dynamic linearization short circuiting rings together make up for an unusually linear and low-distortion woofer.
Highlights:
- Extremely rigid aluminum cone to ensure piston motion at high levels and for better heat transfer at high continuous power levels
- New reinforced die cast aluminum chassis with optimal ventilation and increased stroke
- Venting through holes in cone neck for reduced distortion and compression
- Large motor system with 2” voice coil
- 4-layer voice coil for increased control and better small-cabinet performance
- Two internally built-in aluminum rings for stabilizing the magnetic field leading to lower high-level distortion
- Linear suspension with specially designed CONEX spider for long durability under extreme operating conditions
Product Description:
SW312WA04 is a subwoofer designed for dedicated sub bass applications. They work equally well for high-end hi-fi, high quality home theater systems, and top multimedia setups.
The extremely stiff black aluminum cone, the long linear throw, exaggerated ventilation, and the special dynamic linearization short circuiting rings together make up for an unusually linear and low-distortion woofer. Even at very high signal levels, the unit behaves controlled and without distortion.
Due to low mechanical losses the SW312WA04 masters equally well low level details and extreme dynamic peaks.
Product Specifications:
Parameter | SW312WA04 | Unit | |
Before burn-in | After burn-in | ||
Nominal size | 12� | [inch.] | |
Nominal impedance | 8 | [ohm] | |
Recommended max. upper frequency limit | 300 | [Hz] | |
Sensitivity, 2.83V/1m (calculated from T/S parameters) | 90 | [dB] | |
Power handling, short term, IEC 268-5, no additional filtering | [W] | ||
Power handling, long term, IEC 268-5, no additional filtering | [W] | ||
Power handling, continuous, IEC 268-5, no additional filtering | 250 | [W] | |
Effective radiating area, Sd | 488 | [sq.cm] | |
Resonance frequency (free air, no baffle), Fs | 28 | [Hz] | |
Moving mass, incl. air (free air, no baffle), Mms | 185 | [g] | |
Force factor, Bxl | 14.5 | [N/A] | |
Suspension compliance, Cms | 0.18 | [mm/N] | |
Equivalent air volume, Vas | 61 | [lit.] | |
Mechanical resistance, Rms | 2.8 | [Ns/m] | |
Mechanical Q, Qms | 11.5 | [-] | |
Electrical Q, Qes | 0.50 | [-] | |
Total Q, Qts | 0.48 | [-] | |
Voice coil resistance, RDC | 3.2 | [ohm] | |
Voice coil inductance, Le (measured at 1 kHz) | 1.55 | [mH] | |
Voice coil inside diameter | 51 | [mm] | |
Voice coil winding height | 31 | [mm] | |
Air gap height | 8 | [mm] | |
Theoretical linear motor stroke, Xmax | �11.5 | [mm] | |
Magnet weight | 2.7 | [g] | |
Total unit net weight excl. packaging | 6.5 | [kg] | |
Krm | 10.4 | [mohm] | |
Erm | 0.70 | [-] | |
Kxm | 11.3 | [mH] | |
Exm | 0.75 | [-] |
Reviews
There are no reviews yet.