Dayton Audio ND140-4 5-1/4″ Aluminum Cone Midbass Driver 4 Ohm
₹3,640.00
59 in stock
Dayton Audio ND140-4 5-1/4″ Aluminum Cone Midbass Driver 4 Ohm
Overview:
Dayton Audios compact aluminum cone drivers demonstrate the latest advances in high-excursion design processes.
Product Highlights:
- Extended-range 54 Hz to 8 kHz performance
- Rubber-edged aluminum alloy cone
- Large excursion capability—4 mm Xmax, 20 mm peak
- Self-shielded Neo-Balanced motor structure
- 1″ 4-layer underhung voice coil with polyimide former
- 40 watts RMS power handling
Â
Product description:
Dayton Audios compact aluminum cone drivers demonstrate the latest advances in high-excursion design processes. An efficient, low-distortion Neo-Balanced motor is combined with a rigid yet lightweight aluminum diaphragm, yielding impressive high-impact audio reproduction. Perfect for single point-source applications, or combined in multiples and line arrays.
Â
Product Details:
Brand | Dayton Audio |
Model | ND140-4 |
Part Number | 290-216 |
UPC | 844632081484 |
Unit of Measure | Each |
Weight | 1 |
Product specification:
Nominal Diameter | 5-1/4″ |
Power Handling (RMS) | 40Â Watts |
Power Handling (MAX) | 80Â Watts |
Impedance | 4Ω |
Frequency Response | 54 to 8,000Hz |
Sensitivity | 88.4dB 2.83V/1m |
Voice Coil Diameter | 1″ |
Thiele-Small Parameters:
Resonant Frequency (Fs) | 59.2Hz |
DC Resistance (Re) | 3.7Ω |
Voice Coil Inductance (Le) | 0.79mH |
Mechanical Q (Qms) | 5.35 |
Electromagnetic Q (Qes) | 0.72 |
Total Q (Qts) | 0.63 |
Compliance Equivalent Volume (Vas) | 0.36ft³ |
Mechanical Compliance of Suspension (Cms) | 0.71mm/N |
BL Product (BL) | 3.9T·m |
Diaphragm Mass Inc. Airload (Mms) | 10.1g |
Maximum Linear Excursion (Xmax) | 4mm |
Surface Area of Cone (Sd) | 86.6cm² |
Materials of Construction:
Cone Material | Aluminum |
Surround Material | Rubber |
Voice Coil Former | Kapton® / Polyimide |
Magnet Material | Neodymium |
Mounting information:
Overall Outside Diameter | 5.5″ |
Baffle Cutout Diameter | 4.75″ |
Depth | 2.5″ |
# Mounting Holes | 4 |
Enclouser Volume:
Sealed Volume | 0.4ft³ |
Sealed F3 | 80Hz |
Vented Volume | 0.75ft³ |
Vented F3 | 41Hz |
| Weight | 420 g |
|---|---|
| Dimensions | 14 × 14 × 9 cm |
| Brand | |
| MPN | |
| JAN |
1 review for Dayton Audio ND140-4 5-1/4″ Aluminum Cone Midbass Driver 4 Ohm
Only logged in customers who have purchased this product may leave a review.
Related products
In-Wall Speaker
Suyash Tilak –
I bought this driver a few months back and decided to put it in 0.75 cuft vented box. I initially had a lot of confusion as every other reviewer or even the manufacturer’s suggested optimal box size was more than 1 cuft. But the boxes with size lager than 0.75cuft had a problem of overexcursion in the lower spectrum and the WinISD simulation showed the same. They all suggested this large size because of high Qts. Anyway I decided to go with my plan and tuned the box at 43hz and I’m practically getting f3 of 39hz which is amazing for such a small driver. I am using it as a replacement subwoofer for my JBL creature iii and 15watts is sufficient to get around 90db at my chair(about 2mtr away from sub). The high frequency drivers of the set up crossover at 350Hz and I’m really a fan of open midbass-midrange and that’s why I chose this driver. It turned out to be rather flat instead of people speculating it to be boomy (cuz of high Qts in vented box). This driver really shines in mid region. It has very smooth and very accurate midrange. The bass is accurate and detailed and it does go low…..surprisingly low. It isn’t very loud but loud enough for me. Its kinda expensive here because usually this driver goes for 25-30 dollars on international market and that is the only downside….and the very budget-looking stamped steel basket.