Wavecor WF152BD06 6" Balanced Drive Paper Cone Mid-Woofer 8 Ohm

Wavecor WF152BD06 6″ Balanced Drive Paper Cone Mid-Woofer 8 Ohm

Name: Wavecor WF152BD06 6" Balanced Drive Paper Cone Mid-Woofer 8 Ohm
SKU: WF152BD06
Availability: InStock

₹9,436.00

12 in stock

SKU: WF152BD06 Categories: Drivers, Midrange / Midbass Tags: 8Ohm, Mid-Woofer, Wavecor, WF152BD06

Wavecor WF152BD06 6″ Balanced Drive Paper Cone Mid-Woofer 8 Ohm

Quick Overview:

The Wavecor WF152BD06 is a 6″ paper/glass fiber cone midwoofer that utilizes balanced drive technology and is designed for demanding bass and midrange applications. The WF152BD06 is a very good choices for 2-way speaker systems or even as midrange in 3-way systems.

Product Highlights:

Balanced Drive motor structure for optimal drive force symmetry resulting in largely reduced even order harmonic distortion
Copper cap on center pole to reduce voice coil inductance and to minimize variations in voice coil inductance as a function of voice coil position
Built-in aluminum field-stabilizing ring for reduced high-level distortion
Large motor structure for better control and power handling
Low-loss suspension (high Qm) for better reproduction of details and dynamics
Rigid die cast aluminum chassis with extensive venting for lower air flow speed reducing audible distortion
Progressive suspension with specially designed conex spider for long durability under extreme operating conditions

Product Description:

The Wavecor WF152BD06 is a 6″ paper/glass fiber cone midwoofer that is designed for demanding bass and midrange applications. This driver is powered by a large magnet structure that ensures good efficiency. The WF152BD06 is a very good choices for 2-way speaker systems or even as midrange in 3-way systems.

The large motor system with 1-1/4″ voice coil diameter and large magnet for better control, power handling, and efficiency. The optimized paper/glass fiber cone ensures wide bandwidth and low distortion. Distortion is further reduced by efficient venting of the chassis and voice coil former.

Product Specification:

Parameter	WF152BD06		Unit
Parameter	Before burn-in	After burn-in	Unit
Nominal size	6		[inch.]
Nominal impedance	8		[ohm]
Recommended max. upper frequency limit	2.5		[kHz]
Sensitivity, 2.83V/1m (average SPL in range 200 – 1,000 Hz)	87DB		[dB]
Power handling, short term, IEC 268-5, no additional filtering	70		[W]
Power handling, long term, IEC 268-5, no additional filtering	RMS 70		[W]
Power handling, continuous, IEC 268-5, no additional filtering			[W]
Effective radiating area, Sd			[sq.cm]
Resonance frequency (free air, no baffle), Fs	70	3000	[Hz]
Moving mass, incl. air (free air, no baffle), Mms	13.5		[g]
Force factor, Bxl			[N/A]
Suspension compliance, Cms	0.94	1.33	[mm/N]
Equivalent air volume, Vas			[lit.]
Mechanical resistance, Rms			[Ns/m]
Mechanical Q, Qms	8		[-]
Electrical Q, Qes	0.36		[-]
Total Q, Qts	0.35		[-]
Voice coil resistance, RDC	0.096mh		[ohm]
Voice coil inductance, Le (measured at 10 kHz)	0.11mh		[mH]
Voice coil inside diameter	1.26″		[mm]
Voice coil winding height	4		[mm]
Air gap height			[mm]
Magnet weight	3.65		[g]
Total unit net weight excl. packaging	3.65		[kg]
Krm			[mohm]
Erm			[-]
Kxm			[mH]
Exm			[-]