Wavecor WF182BD10 7" Balanced Drive Paper/Glass Fiber Cone Mid-Woofer 8 Ohm

Wavecor WF182BD10 7″ Balanced Drive Paper/Glass Fiber Cone Mid-Woofer 8 Ohm

Name: Wavecor WF182BD10 7" Balanced Drive Paper/Glass Fiber Cone Mid-Woofer 8 Ohm
Brand: Wavecor
SKU: WF182BD10
Availability: InStock

₹11,641.00

3 in stock

SKU: WF182BD10 Categories: Drivers, MidWoofer Tags: 8Ohm, Midwoofer, Wavecor, WF182BD10 Brand: Wavecor

Wavecor WF182BD10 7″ Balanced Drive Paper/Glass Fiber Cone Mid-Woofer 8 Ohm

Quick Overview:

The Wavecor WF182BD10 is a 7″ paper/glass fiber cone midwoofer that utilizes balanced drive technology and is designed for demanding bass and midrange applications. The WF182BD10 is a very good choices for either 2 or 3-way speaker systems.

Product Highlights:

Vented voice coil former for reduced distortion and compression
Balanced Drive motor structure for optimal drive force symmetry resulting in largely reduced 2nd order harmonic distortion
Built-in aluminum field-stabilizing ring for reduced high-level distortion
Large motor structure for better control and power handling
Copper cap on center pole to reduce voice coil inductance and to minimize variations in voice coil inductance as a function of voice coil position
New vented chassis for lower air flow speed reducing audible distortion
Progressive suspension with specially designed conex spider for long durability under extreme operating conditions

Product Description:

The Wavecor WF182BD10 is a 7″ paper/glass fiber cone midwoofer that is designed for demanding bass and midrange applications. This driver is powered by a large magnet structure that ensures good efficiency. The WF182BD10 is a very good choices for 2-way speaker systems or even as midrange in 3-way systems.

The large motor system with 1-1/2″ voice coil diameter and large magnet for better control, power handling, and efficiency. The optimized paper/glass fiber cone ensures wide bandwidth and low distortion. Distortion is further reduced by efficient venting of the chassis and voice coil former.

Product Specification:

Parameter	WF182BD10		Unit
Parameter	Before burn-in	After burn-in	Unit
Nominal size	7		[inch.]
Nominal impedance	8		[ohm]
Recommended max. upper frequency limit	2.5		[kHz]
Sensitivity, 2.83V/1m (average SPL in range 200 – 1,000 Hz)	86db		[dB]
Power handling, short term, IEC 268-5, no additional filtering	[N/A]		[W]
Power handling, long term, IEC 268-5, no additional filtering	[N/A]		[W]
Power handling, continuous, IEC 268-5, no additional filtering	80		[W]
Effective radiating area, Sd	131		[sq.cm]
Resonance frequency (free air, no baffle), Fs	80	2500	[Hz]
Moving mass, incl. air (free air, no baffle), Mms	16.7		[g]
Force factor, Bxl	6.75		[N/A]
Suspension compliance, Cms	1.0	1.33	[mm/N]
Equivalent air volume, Vas	1.14	[N/A]	[lit.]
Mechanical resistance, Rms	1.33mm/n	0.43	[Ns/m]
Mechanical Q, Qms	11	8.2	[-]
Electrical Q, Qes	0.38	0.26	[-]
Total Q, Qts	0.37	0.25	[-]
Voice coil resistance, RDC	3.3		[ohm]
Voice coil inductance, Le (measured at 10 kHz)	0.088		[mH]
Voice coil outside diameter	7.17″		[mm]
Voice coil winding height	16		[mm]
Air gap height	5		[mm]
Magnet weight	4.9		[g]
Total unit net weight excl. packaging	[N/A]		[kg]
Krm	33		[mohm]
Erm	0.42		[-]
Kxm	157		[mH]
Exm	0.19		[-]